Finding what might be friable asbestos while renovating your Sydney home can throw your plans off track. The first thing to do is stop work and make sure no one enters the affected area. Get a licensed asbestos professional to inspect it and advise on what needs to happen next. 

Key takeaways

  • Stop work: Leave the area alone and make sure no one goes near the material
  • Get it checked: Ask an asbestos professional to identify the material and advise on removal
  • Keep removal safe: Make sure the area is properly sealed off, and the waste is disposed of correctly
  • Check before restarting: Don’t let other workers back in until the site has been cleared

Sydney homeowners are often worried about finding unexpected materials behind bathroom tiles, around hot water pipes, or beneath lino flooring. The situation gets worse especially when asbestos may be involved!

Unlike bonded asbestos, which is held within materials such as fibro cement sheeting, friable asbestos can crumble easily and release dangerous fibres into the air. Disturbing it can pose serious health risks. It cannot be emphasised enough that it needs to be handled with so much care.

Read the blog to know what typically happens when friable asbestos is found on a property. As you get an idea of how to handle the material, your family remains in safe hands, and your project also remains compliant.

Understanding the Risk: Bonded vs. Friable Asbestos

The NSW Environment Protection Authority (EPA) and SafeWork NSW highlight how common asbestos is in Australian homes. In fact, around one in three properties are estimated to contain asbestos materials.

Bonded asbestos can still sometimes be managed or removed without breaking it, but the same cannot be applied to friable asbestos. This is more dangerous, as its fibres can become airborne if the material is anyhow damaged or disturbed.

ASBESTOS CLASSIFICATION MATRIX
NON-FRIABLE / BONDED– Asbestos bound in cement/resin- Fibro sheets, eaves, corrugated roofs- Crumbles under high force only- Class B or Class A Removal LicenceFRIABLE ASBESTOS– Raw, unbonded, or degraded material- Pipe insulation, vermiculite ceilings- Crumbles easily into fine powder- STRICTLY Class A Removal Licence

Friable asbestos, if disturbed at the time of house demolition in Sydney, is going to release tiny fibres that linger in the air. This makes it essential to isolate the area and keep people away.

Four Steps to Take Upon Finding Friable Asbestos

Do not fret if you find friable asbestos in your home. Just follow these steps to ensure safety.

1. Stop Work and Secure the Area

Suspect friable asbestos? Stop all work in that affected area immediately. Make sure that everyone is kept away so as to reduce the risk of exposure.

  • Leave the affected area: Turn off power tools. Also, consider where it is safe to stop heating or cooling systems, and do that so no fibres are spread through the property.
  • Keep others away: Set up barriers and clear warning signs to prevent anyone from entering the affected area.
  • Avoid cleaning it yourself: No sweeping or using a regular household vacuum. Doing this can spread asbestos fibres further through the property.

⚠️ Caution: Remember to not use power tools, compressed air, or high-pressure water near suspected friable asbestos to prevent the release of fibres and contamination spread. Stay away from the material and contact a suitably licensed asbestos removal professional for advice, following SafeWork NSW guidance.

2. Testing and Class A Licensing Engagement

Under NSW regulations, friable asbestos removal in Sydney must be handled by appropriately licensed professionals. Under no circumstances should homeowners attempt to remove it themselves.

FRIABLE HAZMAT PROTOCOL CHECKLISTStop work and seal off rooms/ductwork immediatelyEngage an independent Licensed Asbestos Assessor for testingFile a 5-day SafeWork NSW site notificationEngage Class A licensed removalists with negative-pressure unitsReceive a formal Clearance Certificate before trades return

A sample of the suspected material should be sent to a NATA-accredited laboratory for analysis. If testing confirms that it is friable asbestos, ensure that the removal is carried out by a Class A licensed removalist. SafeWork NSW generally requires at least five days’ notice before licensed asbestos removal work begins, where the notification requirement applies.

3. Enclosure, Negative Air Pressure, and Removal

Time to stop asbestos fibres from spreading into other parts of the home or nearby properties! Get Class A licensed removalists to handle the matter, as they use strict containment measures.

  • Sealing the Work Area: The affected area is immediately enclosed with heavy-duty plastic sheeting so that no fibres escape.
  • Using Negative Air Pressure: HEPA-filtered extraction units are used so that air keeps on flowing into the enclosure and no contaminated air escapes.
  • Wet Removal and Safe Disposal: Asbestos materials are kept damp to reduce airborne dust. At the time of disposal, the material is sealed in suitable, labelled packaging and then transported to an authorised disposal facility. Everything is done in line with applicable requirements.

💡 Pro Tip: Your project involves demolishing a house or clearing an entire block? Choose a team that can coordinate friable asbestos removal in Sydney with excavation and site preparation. This will make it easier to manage these stages safely and efficiently.

4. Air Monitoring and Final Clearance Certification

There’s one more step before the containment area is taken down. An independent Licensed Asbestos Assessor (LAA) has to carry out the required air monitoring.

Air samples are collected from inside and around the removal area to check for airborne asbestos fibres. The assessor can issue a Clearance Certificate if the results meet the applicable clearance criteria. Other builders and tradespeople should only return to the affected area once the required clearance has been given.

A Breakdown of Responsibilities and Protocol

Here’s a table that gives you a better understanding of what to do if you find friable asbestos at the time of a house demolition in Sydney:

Step Responsible Party Legal & Technical Requirement 
Site Isolation Head Contractor / Homeowner Stop work, seal doors, set up warning signs 
Lab Testing & Assessor Checks Licensed Asbestos Assessor NATA lab testing & airborne air monitoring 
Regulatory Notification Class A Removalist Lodge 5-day prior notice with SafeWork NSW 
Controlled Abatement Class A Removalist Sealed containment, HEPA air units, wet removal 
Safe Transport & Disposal Licensed Waste Transporter Tracked disposal at EPA-approved landfill facilities 
Site Re-entry Clearance Independent Assessor Issue formal clearance documentation 

Table: Key Steps to Take When Friable Asbestos Is Found

Final Thoughts

No doubt it is extremely frustrating to find friable asbestos during a renovation! It may even delay your plans. However, following the right steps can get everything back on track again. Just make sure to bring in appropriately licensed professionals to protect everyone on-site and prevent further contamination. Following the required safety procedures will also help you get the property quickly ready for the next stage of work.

Planning a Site Preparation or Demolition Project?

Whether renovating an older home or preparing a site or clearing a block for a new build, definitely get advice from experienced local professionals. They can help manage asbestos-related work and site preparation so the property is safe and ready for your builders to move in.